JAE Automation is continually investing into our design model of how to increase our customer’s efficiency and at the same time reduce the cost of implementing automation solutions. We have discovered that using distributed automation solutions, such as Ethernet I/P or AS-Interface we have been able to reduce the overall cost of the solution and at the same time increase our customer’s efficiency and reduce maintenance costs. With our design model we have also discovered that our flexibility for changes during the design phase as well as the installation of our projects has been much easier to adapt to thereby reducing time and materials for these changes.
If your manufacturing environment is in need of upgrading or you are looking for ways to increase efficiency, throughput and or reduce maintenance costs please contact us and we will be glad to meet and discuss this with you.
Installed at our customer’s site is a Cognex camera and light on our custom stand. The panel is mounted lower on the other side. This had to fit over the end of the conveyor for the camera to see the ink printed on the end of the carton – after a 90=degree transfer.
We designed the brackets to hold either the camera or the light, and an air hose with nozzle for cleaning dust from the lens and light. We also designed the vertical and horizontal supports for the camera and light brackets to have full adjustability.
This is for a client that needed to inspect cartons at a maximum of 250 per minute. We built two of them, as there were two similar lines. We were also responsible for the reject of the cartons which was slightly down stream.
All JAE Automation guarding is reviewed with a safety engineer with respect to Ministry of Labour Regulation 851 for Industrial Establishments and CSA Standards applicable to the equipment involved in the project.
Items to consider when designing a fence guard system around a cell
As part of the development of any automation solution, all of our systems are modeled in a comprehensive 3D design software called SolidWorks. This gives the project and plant manager the ability to complete a virtual walk through of the project. During this review, often forgotten component placements can be viewed prior to construction. As an example: location of HMIs, control stations, walk ways, head room clearance, lift truck aisles, conduit and tubing runs – to list a few.
Maintenance managers see this as a valuable tool for reviewing access to equipment prior to installation for maintenance purposes. As an example, checking to insure there is room to remove or maintain a component, or insure other components are not in the way.
JAE Automation has recently designed a complete Robotic Palletizing and case conveying system for one of our local clients. The system receives cased material from four packaging lines, then palletizes the cases onto four individual pallets and then stretch wraps each pallet. The system has been designed using the latest Fanuc Palletizing robot M-410iC/185 to take advantage of the latest features such as increased palletizing speed. We also used Ethernet/IP technology along with AS-i to make the system very flexible when designing the operation and safety, along with reducing our installation time and cost, thereby providing a very competitive and cost effective solution for our client.
If you have any questions about packing, conveying or palletizing please contact us to review how our team can work with you to develop a system that meets and exceeds your expectations.